What are the advantages of bimetal composite hammers

1. Due to the quality error of the hammer head in the casting process, the hammer head should be inverted according to the current situation and turned over on time when using the hammer head, so that the hammer head is evenly worn and the rotor runs balanced.
2. When stopping, check the gap between the bimetal composite hammer and the screen rod and between the screen rod and the screen rod, adjust if necessary, and replace the screen rod regularly. Because the cost of the hammer is higher than the cost of the screen, the new screen can be used 4-5 shifts more than the old screen.
3. According to the design model, appropriately control the feed size, and strictly prohibit man and machine from exceeding the designed * limit size.
4. Choose an appropriate paper feeding device, such as a flatbed paper feeder or a vibrating paper feeder to feed paper. The bimetal composite hammer ensures uniform and stable feeding, and avoids impact and equipment inefficiency caused by uneven feeding
5. *Weigh the composite hammer head when replacing the new bimetal, and divide it into several groups according to the quality. The quality requirements of each group are equal, otherwise the unbalance of the rotor will easily cause vibration when starting.