How to correctly reduce the fearless wear of the bimetal hammer?

With the development of modern technology and the progress of science and technology, the quality of hammers is constantly improving, with various types and performances. Linyi Tiankuo Casting Co., Ltd. adopts contemporary advanced composite casting technology for different working conditions. , The hammer head is made of high chromium cast iron with good wear resistance, and the hammer handle is made of alloy steel with strong toughness.

The hammer head is not durable, and the production cost of always changing the hammer head increases, and the profit is minimal. The hammer is not durable. In addition to the quality of the hammer itself, pay attention to the following points, which can increase the service life of your hammer by 30%.

1. Whether the work is reliable. During the impact between the hammer head of the crusher and the material, the hammer head is not allowed to fly away from the rotor, or other mechanical failures are caused due to the poor fastening of the hammer head, so the fixing of the hammer head is a problem worthy of attention. Otherwise, there is no "lifetime" at all.

2. Whether the loading and unloading of the hammer is convenient, especially the reproduction phenomenon, after working for a period of time, the various parts of the machine must not be carried out in the ideal condition, such as eccentricity, partial wear, etc., need to be adjusted in time. Quick loading and unloading is a very important indicator.

3. Whether the metal utilization rate of the hammer head is reasonable. Because the wear of the hammer head is inevitable, a hammer head with a certain weight can minimize the unusable mass, that is, how to choose the shape and space size of the hammer head as * is a question worth considering.

4. To reduce unnecessary wear and increase the service life of the hammer head, to make full use of the energy of the rotor and increase the crushing ratio, it is necessary to study the crushing force, which also has great theoretical value.

5. The timely and reasonable allocation of hammers is very important. The crusher runs unstable and vibrates greatly during use. The main reason is that the original balance of the hammer is destroyed after the hammer is worn, and the scientific method is not used for reasonable deployment.

6. The material of the hammer head is the core factor to solve the hammer head's wear resistance and service life. Bimetal hammers are widely used today and have also withstood the test of practice.

7. The bimetal hammer must be turned over early during use. * Use the bimetal hammer to hit one-third of the cross section of the part once, and then use two-thirds. This can prevent the bimetal hammer from being worn too much and forming an acute angle and breaking. It can also make the wear surface of the bimetal hammer head and the striking angle of the material as close as possible to the vertical, so that the heavy friction becomes the light friction.

8. Try to filter as much as possible and reduce wear. The crusher increases the number of screens, and after that, adds more belts to transport the bulk materials back to the crusher; exclude stone waste, clay and impurities, etc., and don't do wasteful work; this also reduces the pressure in the machine cavity, the same It can reduce the wear of the bimetal hammer.